Jump to content

ISDN-Verbindung bricht sofort wieder ab


Der letzte Beitrag zu diesem Thema ist mehr als 180 Tage alt. Bitte erstelle einen neuen Beitrag zu Deiner Anfrage!

Empfohlene Beiträge

Hallo

 

anbei der gewünschte debug

 

00:03:253403070464: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0, TEI 85 changed

to up

00:04:8589934592: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up

00:04:8589934592: %DIALER-6-BIND: Interface BRI0:1 bound to profile Dialer1

00:04:8596229124: BR0:1 PPP: Treating connection as a callout

00:04:8591392104: BR0:1 PPP: Phase is ESTABLISHING, Active Open

00:04:8589934592: BR0:1 LCP: O CONFREQ [Closed] id 1 len 15

00:04:12884901887: BR0:1 LCP: AuthProto CHAP (0x0305C22305)

00:04:8589975552: BR0:1 LCP: MagicNumber 0xB0686D27 (0x0506B0686D27)

00:04:04: BR0:1 LCP: TIMEout: State REQsent

00:04:04: BR0:1 LCP: O CONFREQ [REQsent] id 2 len 15

00:04:04: BR0:1 LCP: AuthProto CHAP (0x0305C22305)

00:04:04: BR0:1 LCP: MagicNumber 0xB0686D27 (0x0506B0686D27)

00:04:04: BR0:1 LCP: I CONFREQ [REQsent] id 1 len 36

00:04:04: BR0:1 LCP: VendorSpecific OUI (0x00040000)

00:04:04: BR0:1 LCP: MRU 1524 (0x010405F4)

00:04:04: BR0:1 LCP: AuthProto CHAP (0x0305C22305)

00:04:04: BR0:1 LCP: MRRU 1524 (0x110405F4)

00:04:04: BR0:1 LCP: EndpointDisc 1 Local (0x130F0175756E657464652D66667431)

00:04:04: BR0:1 LCP: O CONFREJ [REQsent] id 1 len 27

00:04:04: BR0:1 LCP: VendorSpecific OUI (0x00040000)

00:04:04: BR0:1 LCP: MRRU 1524 (0x110405F4)

00:04:04: BR0:1 LCP: EndpointDisc 1 Local (0x130F0175756E657464652D66667431)

00:04:04: BR0:1 LCP: I CONFREJ [REQsent] id 2 len 9

00:04:04: BR0:1 LCP: AuthProto CHAP (0x0305C22305)

00:04:04: BR0:1 LCP: O CONFREQ [REQsent] id 3 len 14

00:04:04: BR0:1 LCP: AuthProto PAP (0x0304C023)

00:04:04: BR0:1 LCP: MagicNumber 0xB0686D27 (0x0506B0686D27)

00:04:04: BR0:1 LCP: I CONFREQ [REQsent] id 2 len 13

00:04:04: BR0:1 LCP: MRU 1524 (0x010405F4)

00:04:04: BR0:1 LCP: AuthProto CHAP (0x0305C22305)

00:04:04: BR0:1 LCP: O CONFACK [REQsent] id 2 len 13

00:04:04: BR0:1 LCP: MRU 1524 (0x010405F4)

00:04:04: BR0:1 LCP: AuthProto CHAP (0x0305C22305)

00:04:04: BR0:1 LCP: I CONFREJ [ACKsent] id 3 len 8

00:04:04: BR0:1 LCP: AuthProto PAP (0x0304C023)

00:04:04: BR0:1 LCP: O CONFREQ [ACKsent] id 4 len 15

00:04:04: BR0:1 LCP: AuthProto CHAP (0x0305C22305)

00:04:04: BR0:1 LCP: MagicNumber 0xB0686D27 (0x0506B0686D27)

00:04:04: BR0:1 LCP: I CONFREJ [ACKsent] id 4 len 9

00:04:04: BR0:1 LCP: AuthProto CHAP (0x0305C22305)

00:04:04: BR0:1 LCP: O CONFREQ [ACKsent] id 5 len 14

00:04:04: BR0:1 LCP: AuthProto PAP (0x0304C023)

00:04:04: BR0:1 LCP: MagicNumber 0xB0686D27 (0x0506B0686D27)

00:04:04: BR0:1 LCP: I CONFREJ [ACKsent] id 5 len 8

00:04:04: BR0:1 LCP: AuthProto PAP (0x0304C023)

00:04:04: BR0:1 LCP: O CONFREQ [ACKsent] id 6 len 15

00:04:04: BR0:1 LCP: AuthProto CHAP (0x0305C22305)

00:04:04: BR0:1 LCP: MagicNumber 0xB0686D27 (0x0506B0686D27)

00:04:04: BR0:1 LCP: I CONFREJ [ACKsent] id 6 len 9

00:04:04: BR0:1 PPP: Replace LCP code 5 id 4 with id 4

00:04:05: BR0:1 LCP: I TERMREQ [ACKsent] id 4 len 4

00:04:05: BR0:1 LCP: O TERMACK [ACKsent] id 4 len 4

00:04:25769803776: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 01919

3550 , call lasted 3 seconds

00:04:25776098108: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down

Link zu diesem Kommentar

zweiter teil

 

00:04:85899345920: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up

00:04:85899345920: %DIALER-6-BIND: Interface BRI0:1 bound to profile Dialer1

00:04:85899345920: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 0191935

50

00:04:85905640452: BR0:1 PPP: Treating connection as a callout

00:04:85900803432: BR0:1 PPP: Phase is ESTABLISHING, Active Open

00:04:85899345920: BR0:1 LCP: O CONFREQ [Closed] id 23 len 15

00:04:90194313215: BR0:1 LCP: AuthProto CHAP (0x0305C22305)

00:04:85899386880: BR0:1 LCP: MagicNumber 0xB068B259 (0x0506B068B259)

00:04:22: BR0:1 LCP: TIMEout: State REQsent

00:04:22: BR0:1 LCP: O CONFREQ [REQsent] id 24 len 15

00:04:22: BR0:1 LCP: AuthProto CHAP (0x0305C22305)

00:04:22: BR0:1 LCP: MagicNumber 0xB068B259 (0x0506B068B259)

00:04:22: BR0:1 LCP: I CONFREQ [REQsent] id 1 len 36

00:04:22: BR0:1 LCP: VendorSpecific OUI (0x00040000)

00:04:22: BR0:1 LCP: MRU 1524 (0x010405F4)

00:04:22: BR0:1 LCP: AuthProto CHAP (0x0305C22305)

00:04:22: BR0:1 LCP: MRRU 1524 (0x110405F4)

00:04:22: BR0:1 LCP: EndpointDisc 1 Local (0x130F0175756E657464652D66667431)

00:04:22: BR0:1 LCP: O CONFREJ [REQsent] id 1 len 27

00:04:22: BR0:1 LCP: VendorSpecific OUI (0x00040000)

00:04:22: BR0:1 LCP: MRRU 1524 (0x110405F4)

00:04:22: BR0:1 LCP: EndpointDisc 1 Local (0x130F0175756E657464652D66667431)

00:04:22: BR0:1 LCP: I CONFREJ [REQsent] id 24 len 9

00:04:22: BR0:1 LCP: AuthProto CHAP (0x0305C22305)

00:04:22: BR0:1 LCP: O CONFREQ [REQsent] id 25 len 14

00:04:22: BR0:1 LCP: AuthProto PAP (0x0304C023)

00:04:22: BR0:1 LCP: MagicNumber 0xB068B259 (0x0506B068B259)

00:04:22: BR0:1 LCP: I CONFREQ [REQsent] id 2 len 13

00:04:22: BR0:1 LCP: MRU 1524 (0x010405F4)

00:04:22: BR0:1 LCP: AuthProto CHAP (0x0305C22305)

00:04:22: BR0:1 LCP: O CONFACK [REQsent] id 2 len 13

00:04:22: BR0:1 LCP: MRU 1524 (0x010405F4)

00:04:22: BR0:1 LCP: AuthProto CHAP (0x0305C22305)

00:04:22: BR0:1 LCP: I CONFREJ [ACKsent] id 25 len 8

00:04:22: BR0:1 LCP: AuthProto PAP (0x0304C023)

00:04:22: BR0:1 LCP: O CONFREQ [ACKsent] id 26 len 15

00:04:22: BR0:1 LCP: AuthProto CHAP (0x0305C22305)

00:04:22: BR0:1 LCP: MagicNumber 0xB068B259 (0x0506B068B259)

00:04:22: BR0:1 LCP: I CONFREJ [ACKsent] id 26 len 9

00:04:22: BR0:1 LCP: AuthProto CHAP (0x0305C22305)

00:04:22: BR0:1 LCP: O CONFREQ [ACKsent] id 27 len 14

00:04:22: BR0:1 LCP: AuthProto PAP (0x0304C023)

00:04:22: BR0:1 LCP: MagicNumber 0xB068B259 (0x0506B068B259)

00:04:22: BR0:1 LCP: I CONFREJ [ACKsent] id 27 len 8

00:04:22: BR0:1 LCP: AuthProto PAP (0x0304C023)

00:04:22: BR0:1 LCP: O CONFREQ [ACKsent] id 28 len 15

00:04:22: BR0:1 LCP: AuthProto CHAP (0x0305C22305)

00:04:22: BR0:1 LCP: MagicNumber 0xB068B259 (0x0506B068B259)

00:04:22: BR0:1 LCP: I CONFREJ [ACKsent] id 28 len 9

00:04:22: BR0:1 LCP: AuthProto CHAP (0x0305C22305)

00:04:22: BR0:1 LCP: O CONFREQ [ACKsent] id 29 len 14

00:04:22: BR0:1 LCP: AuthProto PAP (0x0304C023)

00:04:22: BR0:1 LCP: MagicNumber 0xB068B259 (0x0506B068B259)

00:04:22: BR0:1 PPP: Replace LCP code 5 id 4 with id 4

00:04:22: BR0:1 LCP: I TERMREQ [ACKsent] id 4 len 4

00:04:22: BR0:1 LCP: O TERMACK [ACKsent] id 4 len 4

00:04:98784247808: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 01919

3550 , call lasted 3 seconds

00:04:98790542140: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down

00:04:98784247872: BR0:1 LCP: O CONFREQ [Closed] id 33 len 10

00:04:103079215103: BR0:1 LCP: MagicNumber 0xB068C0AB (0x0506B068C0AB)

00:04:98790542124: BR0:1 LCP: State is Closed

00:04:98790542188: BR0:1 PPP: Phase is DOWN

00:04:98785705323: %DIALER-6-UNBIND: Interface BRI0:1 unbound from profile Dialer1

Link zu diesem Kommentar

Was ISDN betrifft bin ich jetzt nicht der Spezialist, aber folgendes kannst du mal probieren (laeuft bei mir so):

 

1. nat aus dem BRI raus, macht der Dialer

2. ppp authentication pap chap in BRI

3. no dialer rotary-group 1 in BRI

4. dialer pool-member 1 in BRI

5. dialer pool 1 in Dialer

 

Dann ein

deb isdn sta

deb ppp neg

deb ppp auth

ter mon

 

Dann einen Ping absetzen und debug posten.

Link zu diesem Kommentar

anbei noch ein debug - ich glaube jetzt bin ich ein weniger weiter, zugangsnummer ist jetzt die 01929 ebenfalls von freenet

 

er zeigt zumindest AUTHENTICATING by both an.....

 

00:04:33: ISDN BR0: Outgoing call id = 0x8006, dsl 0

00:04:33: ISDN BR0: Event: Call to 01929 at 64 Kb/s

00:04:33: ISDN BR0: process_bri_call(): call id 0x8006, called_number 01929, spe

ed 64, call type DATA

00:04:141733961728: CC_CHAN_GetIdleChanbri: dsl 0

00:04:141733961728: Found idle channel B1

00:04:146030336264: ISDN BR0: received HOST_PROCEEDING call_id 0x8006.

00:04:154618863616: ISDN BR0: received HOST_CONNECT call_id 0x8006

00:04:154618822668: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up

00:04:154618822656: %DIALER-6-BIND: Interface BRI0:1 bound to profile Dialer1

00:04:154618822656: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 01929

00:04:154625117188: BR0:1 PPP: Treating connection as a callout

00:04:154620280168: BR0:1 PPP: Phase is ESTABLISHING, Active Open

00:04:154618822656: BR0:1 LCP: O CONFREQ [Closed] id 4 len 15

00:04:158913789951: BR0:1 LCP: AuthProto CHAP (0x0305C22305)

00:04:154618863616: BR0:1 LCP: MagicNumber 0xB068F19C (0x0506B068F19C)

00:04:154625117340: ISDN BR0: Event: Connected to 01929 on B1 at 64 Kb/s

00:04:36: BR0:1 LCP: I CONFREQ [REQsent] id 187 len 25

00:04:36: BR0:1 LCP: AuthProto PAP (0x030.4C023)

00:04:36: BR0:1 LCP: MagicNumber 0xB4324CB1 (0x0506B4324CB1)

00:04:36: BR0:1 LCP: MRRU 1524 (0x110405F4)

00:04:36: BR0:1 LCP: EndpointDisc 1 Local (0x13070166666D32)

00:04:36: BR0:1 LCP: O CONFREJ [REQsent] id 187 len 15

00:04:36: BR0:1 LCP: MRRU 1524 (0x110405F4)

00:04:36: BR0:1 LCP: EndpointDisc 1 Local (0x13070166666D32)

00:04:36: BR0:1 LCP: I CONFACK [REQsent] id 4 len 15

00:04:36: BR0:1 LCP: AuthProto CHAP (0x0305C22305)

00:04:36: BR0:1 LCP: MagicNumber 0xB068F19C (0x0506B068F19C)

00:04:36: BR0:1 LCP: I CONFREQ [ACKrcvd] id 188 len 14

00:04:36: BR0:1 LCP: AuthProto PAP (0x0304C023)

00:04:36: BR0:1 LCP: MagicNumber 0xB4324CB1 (0x0506B4324CB1)

00:04:36: BR0:1 LCP: O CONFACK [ACKrcvd] id 188 len 14

00:04:36: BR0:1 LCP: AuthProto PAP (0x0304C023)

00:04:36: BR0:1 LCP: MagicNumber 0xB4324CB1 (0x0506B4324CB1)

00:04:36: BR0:1 LCP: State is Open

00:04:36: BR0:1 PPP: Phase is AUTHENTICATING, by both

00:04:36: BR0:1 CHAP: Using alternate hostname test

00:.04:36: BR0:1 CHAP: O CHALLENGE id 4 len 25 from "test"

00:04:36: BR0:1 PAP: O AUTH-REQ id 4 len 14 from "test"

00:04:36: BR0:1 PAP: I AUTH-ACK id 4 len 5

00:04:36: BR0:1 LCP: I TERMREQ [Open] id 189 len 4

00:04:36: BR0:1 LCP: O TERMACK [Open] id 189 len 4

00:04:36: BR0:1 PPP: Phase is TERMINATING

00:04:163208757247: ISDN BR0: received HOST_FACILITY_INVOKE call_id 0x8006

Cause i = 0x83AF - Resources unavailable, unspecified

00:04:158913830912: Facility i = 0x91A114020139020124300C300AA1053003020

100820100

00:04:158913830912: - ETSI Supplementary Service, Invoke, AOC-E Charging Uni

ts: 0

00:04:158920084612: ISDN BR0: received HOST_DISCONNECT call_id 0x8006

00:04:158913789952: ISDN BR0: Event: Call to <unknown> was hung up.

00:04:158920084484: ISDN BR0: process_disc_ack(): call id 0x8006, ces 1, call ty

pe DATA

00:04:163208757247: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down

00:04:158913789952: BR0:1 LCP: State is Closed

00:04:158920084332: BR0:1 PPP: Phase is DOWN

00.:04:158915247467: %DIALER-6-UNBIND: Interface BRI0:1 unbound from profile Dia

ler1

Link zu diesem Kommentar

Hallo

 

habe nun den Provider gewechselt und kann mich jetzt einwählen. Allerdings funktioniert das Internet nicht. Ich kann auch keine Ping erfolgreich absetzen, weder vom pc noch vom Router.

 

Im Anhang meine Config:

 

 

Building configuration...

 

Current configuration:

!

version 12.0

no service pad

service timestamps debug uptime

service timestamps log uptime

no service password-encryption

!

hostname cisco

!

!

!

!

!

!

ip subnet-zero

!

no ip domain-lookup

isdn switch-type basic-net3

isdn voice-call-failure 0

 

interface Ethernet0

description connected to EthernetLAN

ip address 192.168.0.100 255.255.255.0

no ip directed-broadcast

ip nat inside

!

interface BRI0

description connected to Internet

no ip address

no ip directed-broadcast

encapsulation ppp

dialer pool-member 1

isdn switch-type basic-net3

isdn send-alerting

isdn sending-complete

ppp authentication chap

!

interface Dialer1

description connected to Internet

ip address negotiated

no ip directed-broadcast

ip nat outside

encapsulation ppp

dialer pool 1

dialer string 01929

dialer-group 1

no cdp enable

ppp authentication chap

ppp chap hostname ffm2

ppp chap password 7 120D000406

!

ip nat inside source list 1 interface Dialer1 overload

no ip http server

ip classless

ip route 0.0.0.0 0.0.0.0 Dialer1

!

access-list 1 permit any

dialer-list 1 protocol ip list 1

!

line con 0

exec-timeout 0 0

login

transport input none

stopbits 1

line vty 0 4

login

!

rcapi server port 2578

!

!

end

Link zu diesem Kommentar
Der letzte Beitrag zu diesem Thema ist mehr als 180 Tage alt. Bitte erstelle einen neuen Beitrag zu Deiner Anfrage!

Schreibe einen Kommentar

Du kannst jetzt antworten und Dich später registrieren. Falls Du bereits ein Mitglied bist, logge Dich jetzt ein.

Gast
Auf dieses Thema antworten...

×   Du hast formatierten Text eingefügt.   Formatierung jetzt entfernen

  Only 75 emoji are allowed.

×   Dein Link wurde automatisch eingebettet.   Einbetten rückgängig machen und als Link darstellen

×   Dein vorheriger Inhalt wurde wiederhergestellt.   Editor-Fenster leeren

×   Du kannst Bilder nicht direkt einfügen. Lade Bilder hoch oder lade sie von einer URL.

×
×
  • Neu erstellen...