Cisco 760 und pcAnywhere! Dringend!!!

[osirus01 10]

Hallo, habe hier ein Problem mit mit 2 CS760 Router und pcAnywhere.

 

Der Mitarbeiter wählt sich über den Router bei uns ins Netz um hier zuarbeiten. Nun haben wir leider das Problem das wir uns mit pcAnywhere nicht so wirklich auf seinem Notebook einwählen können.

PcAnywhere baut zwar eine Verbindung auf, aber die Verbindung ist so langsam, das das Bild nur zur hälfte aufgebaut ist und eine Fernsteuerung erst gar nicht möglich ist. Hat jemand da eine Idee?

 

 

 

Hier mal die Config

 

SET SCREENLENGTH 20

SET COUNTRYGROUP 1

SET LAN MODE ANY

SET WAN MODE ONLY

SET AGE OFF

SET MULTIDESTINATION OFF

SET SWITCH NET3

SET ALAWVOICE ON

SET INTERNALTONES NONE

SET 1 DELAY 30

SET 2 DELAY 30

SET BRIDGING ON

SET LEARN ON

SET PASSTHRU OFF

SET SPEED AUTO

SET PLAN NORMAL

SET 1 AUTO ON

SET 2 AUTO ON

SET 1 NUMBER

SET 2 NUMBER

SET 1 BACKUPNUMBER

SET 2 BACKUPNUMBER

SET 1 RINGBACK

SET 2 RINGBACK

SET 1 CLIVALIDATENUMBER

SET 2 CLIVALIDATENUMBER

SET CLICALLBACK OFF

SET CLIAUTHENTICATION OFF

SET SYSTEMNAME bum

LOG CALLS TIME VERBOSE

SET UNICASTFILTER OFF

DEMAND 1 THRESHOLD 0

DEMAND 2 THRESHOLD 48

DEMAND 1 DURATION 1

DEMAND 2 DURATION 1

DEMAND 1 SOURCE LAN

DEMAND 2 SOURCE BOTH

TIMEOUT 1 THRESHOLD 0

TIMEOUT 2 THRESHOLD 48

TIMEOUT 1 DURATION 0

TIMEOUT 2 DURATION 0

TIMEOUT 1 SOURCE LAN

TIMEOUT 2 SOURCE BOTH

SET AOCDTIMEOUT OFF

SET PASSWORD SYSTEM ENCRYPTED

SET REMOTEACCESS PROTECTED

SET LOCALACCESS PROTECTED

SET CLICKSTART ON

SET LOGOUT 5

SET CALLERID OFF

SET PPP AUTHENTICATION IN CHAP

SET PPP CHAPREFUSE NONE

SET PPP AUTHENTICATION OUT CHAP

SET PPP AUTHENTICATION ACCEPT EITHER

SET PPP TAS CLIENT 0.0.0.0

SET PPP TAS CHAPSECRET LOCAL ON

SET PPP SECRET CLIENT ENCRYPTED xxxx

SET PPP CALLBACK REQUEST OFF

SET PPP CALLBACK REPLY OFF

SET PPP NEGOTIATION INTEGRITY 10

SET PPP NEGOTIATION COUNT 10

SET PPP NEGOTIATION RETRY 3000

SET PPP TERMREQ COUNT 2

SET PPP MULTILINK ON

SET COMPRESSION OFF

SET PPP BACP ON

SET PPP ADDRESS NEGOTIATION LOCAL OFF

SET PPP IP NETMASK LOCAL OFF

SET IP PAT UDPTIMEOUT 5

SET IP PAT TCPTIMEOUT 30

SET IP RIP TIME 30

SET CALLDURATION 0

SET SNMP CONTACT ""

SET SNMP LOCATION ""

SET SNMP TRAP COLDSTART OFF

SET SNMP TRAP WARMSTART OFF

SET SNMP TRAP LINKDOWN OFF

SET SNMP TRAP LINKUP OFF

SET SNMP TRAP AUTHENTICATIONFAIL OFF

SET DHCP OFF

SET DHCP DOMAIN

SET DHCP NETBIOS_SCOPE

SET CALLTIME VOICE INCOMING OFF

SET CALLTIME VOICE OUTGOING OFF

SET CALLTIME DATA INCOMING OFF

SET CALLTIME DATA OUTGOING OFF

SET USER LAN

SET BRIDGING OFF

SET IP ROUTING ON

SET IP ADDRESS xxxxxx.xxx.xxx

SET IP NETMASK xxx.xxx.xxx.xxx

SET IP FRAMING ETHERNET_II

SET IP PROPAGATE ON

SET IP COST 1

SET IP RIP RECEIVE OFF

SET IP RIP UPDATE OFF

SET IP RIP VERSION 1

SET USER Internal

SET IP ROUTING ON

SET IP ADDRESS 0.0.0.0

SET IP NETMASK 0.0.0.0

SET IP FRAMING ETHERNET_II

SET IP RIP RECEIVE V1

SET IP RIP UPDATE OFF

SET IP RIP VERSION 1

SET USER Standard

SET PROFILE ID 000000000000

SET PROFILE POWERUP ACTIVATE

SET PROFILE DISCONNECT KEEP

SET IP ROUTING ON

SET IP ADDRESS 0.0.0.0

SET IP NETMASK 0.0.0.0

SET IP FRAMING NONE

SET IP RIP RECEIVE V1

SET IP RIP UPDATE OFF

SET IP RIP VERSION 1

SET USER xxxxx

SET PROFILE ID 000000000000

SET PROFILE POWERUP ACTIVATE

SET PROFILE DISCONNECT KEEP

SET BRIDGING OFF

SET 1 NUMBER 00xxxxxxxxxxxxx

SET 2 NUMBER 00xxxxxxxxxxxxx

SET 1 RINGBACK xxxx

SET 2 RINGBACK xxxx

SET CLIAUTHENTICATION OFF

DEMAND 2 THRESHOLD 30

TIMEOUT 1 DURATION 300

SET PPP SECRET HOST ENCRYPTED 15101e01

SET PPP CALLBACK REQUEST OFF

SET PPP CALLBACK REPLY ALWAYS

SET COMPRESSION STAC

SET IP ROUTING ON

SET IP ADDRESS xxx.xxx.xxx.xxx

SET IP NETMASK xxx.xxx.xxx.xxx

SET IP FRAMING NONE

SET IP PROPAGATE ON

SET IP COST 1

SET IP RIP RECEIVE V1

SET IP RIP UPDATE OFF

SET IP RIP VERSION 1

SET IP ROUTE DEST xxx.xxx.xxx.xxx/xxx GATEWAY xxx.xxx.xxx.xxx PROPAGATE OFF COST 1

SET IP ROUTE DEST 0.0.0.0/0 GATEWAY xxx.xxx.xxx.xxx PROPAGATE OFF COST 1

CD

LOGOUT

bum>

 

 

 

Notebook ist direkt am Router angeschlosssen.

 

Danke für Eure Hilfe!!!!

 

Gruß

 

Osirus

[osirus01 10]

Fehler gefunden.

 

Layer1 = Kabel defekt :D :D

 

 

Gruß

Osirus