801 Kriese!

[BlueIcE 10]

Sears,

 

so, jetzt geht der mist schon wieder nicht.

Problem ist, ich habe keinen vernünftigen Ansatz wo es klemmt...

 

Das ding geht einen Tag und dann auf einmal nicht mehr?!

Imho sieht es so aus das der Router dreimal für ca. 1ne Sekunde anwahlt, wenn ein Request auf dem LAN kommt und dann wieder auflegt.

 

Anbei hab ich mal den Debug...

Vielleicht kann da mal einer neben dem Rennen reinschauen ;-)

 

IcE-Cisco-801#

00:05:25: ISDN BR0: Outgoing call id = 0x8004, dsl 0

00:05:107381995516: ISDN BR0: Event: Call to 0192076 at 64 Kb/s

00:05:107381995468: ISDN BR0: process_bri_call(): call id 0x8004, called_number 0192076, speed 64, call type DATA

00:05:25: CCBRI_Go Fr Host InPkgInfo (Len=23) :

00:05:25: 1 0 1 80 4 0 4 2 88 90 18 1 83 70 8 80 30 31 39 32 30 37 36

00:05:25:

00:05:25: CC_CHAN_GetIdleChanbri: dsl 0

00:05:25: Found idle channel B1

00:05:25: ISDN BR0: trigger_calling_called_debug, dsl 0, callref 0x4, outgoing TRUE

00:05:25: CCBRI_Go Fr L3 pkt (Len=7) :

00:05:25: D 1 4 B7 18 1 89

00:05:25:

00:05:25: ISDN BR0: LIF_EVENT: ces/callid 1/0x8004 HOST_INFORMATION

IcE-Cisco-801#

00:05:26: CCBRI_Go Fr L3 pkt (Len=4) :

00:05:26: 2 1 4 98

00:05:26:

00:05:26: ISDN BR0: LIF_EVENT: ces/callid 1/0x8004 HOST_PROCEEDING

00:05:26: B-channel assigned in previous message call id = 0x8004

00:05:26: CCBRI_Go Fr L3 pkt (Len=15) :

00:05:26: 7 1 4 91 29 5 4 5 1E D 1F 4C 2 0 C3

00:05:26:

00:05:26: ISDN BR0: LIF_EVENT: ces/callid 1/0x8004 HOST_CONNECT

*Mar 1 01:05:26: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up

*Mar 1 01:05:26: %DIALER-6-BIND: Interface BR0:1 bound to profile Di1

00:05:26: ISDN: get_isdn_service_state(): idb 0x28112C8 bchan 2 is_isdn 1 Not a Pri

00:05:26: ISDN BR0: Event: Connected to 0192076 on B1 at 64 Kb/s

00:05:115964116992: ISDN BR0: Event: Hangup call to call id 0x8004

00:05:115964117675: ISDN BR0: process_disconnect(): call id 0x8004, call type is DATA, b_idb 0x28112C8, ces 1, cause Normal call clearing(0x10)

*Mar 1 01:05:27: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 0192076 dialoutuser

00:05:115964116992:

IcE-Cisco-801#ISDN: get_isdn_service_state(): idb 0x28112C8 bchan 2 is_isdn 1 Not a Pri

00:05:27: CCBRI_Go Fr Host InPkgInfo (Len=13) :

00:05:27: 5 0 1 80 4 3 8 1 90 8 2 80 90

00:05:27:

00:05:27: CCBRI_Go Fr L3 pkt (Len=27) :

00:05:27: 4D 1 4 97 1C 15 91 A1 12 2 2 D7 A6 2 1 24 30 9 30 7 A1 5 30 3 2 1 1

00:05:27:

00:05:27: ISDN BR0: LIF_EVENT: ces/callid 1/0x8004 HOST_DISCONNECT_ACK

00:05:27: ISDN: get_isdn_service_state(): idb 0x28112C8 bchan 2 is_isdn 1 Not a Pri

00:05:27: ISDN BR0: HOST_DISCONNECT_ACK: call type is DATA

*Mar 1 01:05:27: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down

*Mar 1 01:05:27: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di1

00:05:27: ISDN BR0: LIF_EVENT: ces/callid 1/0x8004 HOST_FACILITY_INVOKE

 

 

THX IcE

[BlueIcE 10]

noch ein bisschen Konfig...

 

interface BRI0

no ip address

encapsulation ppp

shutdown

dialer pool-member 1

isdn switch-type basic-net3

no cdp enable

ppp multilink

!

interface Dialer1

description connected to Arcor

ip address negotiated

ip access-group 121 in

no ip proxy-arp

ip nat outside

encapsulation ppp

load-interval 30

dialer pool 1

dialer remote-name Cisco1

dialer idle-timeout 238

dialer string 0192076

dialer hold-queue 10

dialer load-threshold 160 inbound

dialer-group 1

compress mppc

no cdp enable

ppp authentication chap pap callin

ppp chap hostname *******

ppp pap sent-username acror password 7 *********

ppp multilink

 

 

access-list 121 permit icmp any any echo-reply

access-list 121 permit tcp any any established

access-list 121 permit udp any eq ntp any

access-list 121 permit udp any eq domain any

[BlueIcE 10]

hier noch ein bisschen Debug...

Vorallem das ds0 Problem kenne/verstehe ich nicht!

 

IcE-Cisco-801#ping heise.de

Translating "heise.de"...domain server (145.253.2.75)

00:11:46: Domain: query for heise.de type 1 to 145.253.2.75

00:11:46: BR0 DDR: rotor dialout [best] least recent failure is also most recent failure

00:11:46: BR0 DDR: rotor dialout [best] trying untried dialout

00:11:46: BR0 DDR: rotor dialout [best] also has most recent failure

00:11:46: BR0 DDR: rotor dialout [best]

00:11:46: BR0 DDR: Dialing cause ip (s=192.168.6.200, d=145.253.2.75)

00:11:46: BR0 DDR: Attempting to dial 0192076

00:11:46: ISDN BR0: TX -> SETUP pd = 8 callref = 0x0D

00:11:46: Bearer Capability i = 0x8890

00:11:46: Channel ID i = 0x83

00:11:46: Called Party Number i = 0x80, '0192076', Plan:Unknown, Type:Unknown

00:11:47: ISDN BR0: RX <- SETUP_ACK pd = 8 callref = 0x8D

00:11:47: Channel ID i = 0x89

00:11:48: ISDN BR0: RX <- CALL_PROC pd = 8 callref = 0x8D

00:11:48: ISDN BR0: RX <- CONNECT pd = 8 callref = 0x8D

00:11:48: Date/Time i = 0x04051E1127

00:11:48: Connected Number i = 0x00C3

*Mar 1 01:11:48: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up

00:11:48: BR0:1: interface must be fifo queue, force fifo

*Mar 1 01:11:48: %DIALER-6-BIND: Interface BR0:1 bound to profile Di1

00:11:48: AAA/ACCT/PROG: Could not determine ds0 to update Connect Progress

00:11:48: ISDN BR0: TX -> CONNECT_ACK pd = 8 callref = 0x0D

00:11:48: AAA/ACCT/PROG: Could not determine ds0 to update Connect Progress

00:11:48: BR0:1 AAA/DISC: 18/"Host Request"

00:11:48: BR0:1 AAA/DISC/EXT: 1046/"Upper Layer Req Close"

00:11:48: BR0:1 AAA/DISC: 1/"User Request"

00:11:48: BR0:1 AAA/DISC/EXT: 1045/"Received Terminate"

00:11:48: BR0:1 DDR: disconnecting call

00:11:48: AAA/ACCT/PROG: Could not determine ds0 to update Connect Progress

*Mar 1 01:11:48: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 0192076 dialoutuser

00:11:49: ISDN BR0: TX -> DISCONNECT pd = 8 callref = 0x0D

00:11:49: Cause i = 0x8090 - Normal call clearing

00:11:49: ISDN BR0: RX <- RELEASE pd = 8 callref = 0x8D

00:11:49: Facility i = 0x91A1120202C86802012430093007A1053003020101

00:11:49: - ETSI Supplementary Service, Invoke, AOC-E Charging Units: 1

*Mar 1 01:11:49: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down

00:11:49: DDR: Call disconnected, 0 packets unqueued and discarded

00:11:49: BR0 DDR: has total 0 call(s), dial_out 0, dial_in 0

00:11:49: BR0:1 AAA/DISC: 2/"Lost Carrier"

00:11:49: BR0:1 AAA/DISC/EXT: 1011/"Lost Carrier"

00:11:49: BR0:1 DDR: disconnecting call

*Mar 1 01:11:49: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di1

00:11:49: BRI0:1: AOC-E Recorded Units = 1

00:11:49: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0x0D

[Frank04 10]

Oben meckert Layer1, dass es sich um keine Pri handelt. Steht global in Deiner Konfig irgendwas von basic-net5 ?

[mr._oiso 10]

Hallo BlueIce

 

Frank04 hat wahrscheinlich recht !

Hast Du die "isdn switch-type basic-net3" global oder

nur am Interface konfiguriert ?

In der Regel sollte es global getan werden.

Danach übernimmt er sie auch am BRI !

 

Hier als Unterstützung die Message des Output Interpreters

von Cisco :

 

Bei beiden loggings die gleiche Aussage !

 

ERROR MESSAGE NOTIFICATIONS (if any)

 

%LINK-3-UPDOWN (x2): Interface [chars], changed state to [chars]

 

Explanation: The interface hardware has gone either up or down.

 

Recommended Action: If the state change was unexpected, confirm the configuration settings for the interface.

--------------------------------------------------------------------------------

 

No information on error code ISDN-6-CONNECT

No information on error code DIALER-6-UNBIND

No information on error code DIALER-6-BIND

 

 

MfG

 

Mr. Oiso

[Franz2 10]

Das Interface BRI0 ist shutdown

[Blacky_24 10]

Wenn das wirklich die aktuelle Konfig ist?!

 

Habs jetzt aktuell nicht getestet aber wenn der Router kein Up-Interface hätte würde er garnicht erst wählen?!

 

Gruss

Markus

[BlueIcE 10]

Hi Leutz!

 

thx für eure Hilfe! Er geht wieder.

 

Das das Bri0 down war, war absicht, sonst hätte das Teil noch ewig ins Nirwana gewählt.

Mein eigentliches Problen war...

 

>ppp authentication chap pap callin

>ppp chap hostname *******

>ppp pap sent-username acror password 7 *********

 

da fehlt das chap Passwort!

Ich habs aber auch nicht gesehen.

Das heisse daran ist, wie wählerisch Arcor da ist.

Mal lassen die pap zu, mal nicht.

 

Ich hab jetzt das Chap rein und voilá, es geht!

 

Danke nochmal!